DAS Event Series
DAS Event Series
Das Event, Line Arrays series, is without a doubt the most popular speaker for small to medium size events. The Event series puts the acclaimed DAS sound at your reach. Features only available in much more expensive speaker boxes are now available in the Event series. Line arrays systems are not exclusive of big sound productions anymore. For portable sound or fixed installations. The Event series provides a reliable sound ideal for any indoor or outdoor events.
DAS Event series has 7 models in the series. 4 mains Event 208a, 210a, 212a, and the 212.120A. One monitor Event M210a, and two subwoofers Event 218a and 121a. These models provide several configurations for any event size, small, medium and large.
Event 208a, 210a, and 212a Performance
The speakers work in a twin band configuration where each speaker operates in a specific frequency range. At low frequencies, the speakers work alongside each other with their own amplifier for maximum power. Above the low frequencies, the DSP feeds only one mid-range driver, eliminating off access interference between the drivers enabling the event series to maintain optimal polar frequency response. The Event series take advantage of the M75 compression drivers with a 75mm aluminum EFW voice coil and titanium diaphragm. The proprietary waveguides provide 90 degrees coverage.
The Event 210a is probably the most sold speaker in the series. The 210a is a 3-way powered speaker with a built-in 3-channel amplifier. Its two 10" woofers work in a twin configuration at a specific frequency ranges for maximum power. Because it is bigger than the 208a, the 210a has more presence and looks impressive. RMS and peak limiters protect the components against overpowering. The speaker's rear panel includes Neutrik® XLR and powerCON connectors. D.A.S.’s Easy-DSP™ interface which simplifies preset selection for the number of units and throw depth. The Event 210a is ready for those more significant events where sound quality and volume are important
The line array Event is so easy to set up thanks to the EZ DPS button in the pack of the speaker. Press or depress the buttons as showing in the diagram according to the number of units you use. There is also a down fill preset. It is really that easy.